National Flooring Equipment PANTHER 8274 страница 6 Скачать руководство пользователя | Manualshive

Страница: 6 / 49

background image

Page 6

RULES FOR SAFE OPERATION

GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS

Tools marked “Grounding Required” have a three wire cord and three prong grounding plug. The plug
must be connected to a properly grounded outlet (Figure A & B)

.

If the tool should electrically malfunction

or break down, grounding provides a low resistance path to carry electricity away from the user, reducing
the risk of electric shock.

The grounding prong in the plug is connected through the green wire inside the cord to the grounding
system in the tool. The green wire in the cord must be the only wire connected to the tool's grounding
system and must never be attached to an electrically “live” terminal.

Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with
all codes and ordinances. The plug and outlet should look like those in Figure A & B.

Figure A

2

1

3

GROUNDING

Figure B

WARNING:

Electrical cords can be hazardous. Misuse can result in fire or death by electrical

shock. Read carefully and follow all directions.

WARNING:

Improperly connecting the grounding wire can result in the risk of electric shock.

Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do
not modify the plug provided with the tool. Never remove the grounding prong from the plug. Do not
use the tool if the cord or plug is damaged. If the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician.

115 Volt

230 Volt

1. Cover of grounded outlet box
2. Outlet ground
3. Grounding prong

WARNING:

Only use the socket outlet on the machine for purpose specified in the instruction

manual.

Jobsite receptacles can vary. Check voltage at receptacles on the jobsite for the best voltage supply. 15
amp GFI outlets are not recommended.

«
...
4
5
6
7
8
...
»

Содержание PANTHER 8274


















































Отзывы:

Нет отзывов

Похожие инструкции для PANTHER 8274

Бренд: Jepson Страницы: 6

Бренд: Proctor-Silex Страницы: 4

Бренд: Rockwood Страницы: 8

Бренд: Sealey Страницы: 2

Бренд: Binatone Страницы: 34

Бренд: RADLEY Страницы: 17

Бренд: Hitachi Koki Страницы: 92

Бренд: Home Depot Страницы: 8

Бренд: Scarlett Страницы: 13

Бренд: Scarlett Страницы: 14

Бренд: HSS Hire Страницы: 2

Бренд: Flex Страницы: 209

Бренд: Scheppach Страницы: 152

Бренд: IKA Страницы: 100

Бренд: Chicago Pneumatic Страницы: 32

Бренд: YATO Страницы: 96

Бренд: SUHNER Страницы: 40

Бренд: Haussmann Xpert Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды