Maintenance
13
LIGHT
If the light won’t turn on, ensure that the plug is connected at the bottom of the control
box (Figure 12).
ACCESSING ELECTRICAL COMPONENTS
1. Disconnect machine from power; remove the safety key.
2. Unplug light located under the cover (Figure 11).
3. Remove (4) bolts – 2 on the side, 2 on the top – on cover.
4. Remove cover.
5. Remove (4) screws – 2 on the top near controls, 2 on the bottom – from control
panel.
6. Remove control panel to gain access to electrical components (Figure 13).
FIG. 13
FIG. 12
Содержание HELIX
