background image

LIMITED EXTENDED PROTECTION WARRANTY FOR

NATIONAL COMFORT PRODUCTS (NCP) BENSALEM, PA

COMFORT PACK GAS UNITS

FAILURE TO MAINTAIN YOUR EQUIPMENT WILL VOID THIS WARRANTY

Your new NCP product must be properly installed, operated and maintained in accordance with the unit’s instructions, operation and maintenance  

instructions provided with each NCP unit. Failure to provide maintenance per NCP instructions will void this warranty.  You will be asked to provide written 

documentation of annual and other periodic preventive maintenance. The warranty is void if the covered product is operated with a return air temperature 

of less than 60 degrees. The NCP product is warranted to be free from all manufacturing defects, material or workmanship, for a period of five years from 

the date of installation (receipt required), whether or not actual use begins on this date, or five years from the date of manufacture, if the date of installa-

tion cannot be verified. Immediate notice to NCP will (A) provide a new or remanufactured part to replace the defective part, without charge for the part 

itself, or (B) provide a replacement unit.

National Comfort Products will not be responsible for:  local transportation, removing, related service, labor, diagnosis calls, refrigerant, costs incurred for 

returning defective parts, damage or repairs required due to faulty installation or improper application by others, damage as a result of fire, wind, floods, 

lightning, accidents, or corrosive atmosphere.

EXTENDED 2ND THRU 5TH YEAR COMPRESSOR WARRANTY

If the compressor should fail because of a manufacturing defect, is in the original installation, has been operated under normal conditions, and is in the 2nd 

to 5th year following the above determined date, NCP will provide, at its option, a new or remanufactured replacement compressor.

EXTENDED 2ND THRU 10TH YEAR HEAT EXCHANGER WARRANTY 

If the heat exchanger of the gas furnace should fail because of a manufacturing defect, is in the original installation, has been operated under normal 

conditions, and is in the 2nd to 10th year following the above determined date, NCP will provide, at its option, a new or remanufactured replacement heat 

exchanger. AIR FILTER CHANGE sticker has been provided on your unit for you record keeping convenience. 

Replacement parts are warranted for the remainder of the original product warranty, or 90 days, whichever is longer. NCP may require that defective parts 

be returned to verify and identify the cause of the defect.

LIMITATION OF WARRANTIES — ALL IMPLIED WARRANTIES (INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY) 

ARE HEREBY LIMITED IN DURATION TO THE PERIOD FOR WHICH EACH LIMITED WARRANTY IS GIVEN. SOME STATES 

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT 

APPLY TO YOU. THE EXPRESSED WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED,  

ENLARGED, OR CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER PERSON WHATSOEVER. MATERIAL IS INSPECT-

ED AT THE FACTORY AND RELEASED TO TRANSPORTATION AGENCY IN GOOD CONDITION. WHEN RECEIVED, VISUAL  

INSPECTION MUST BE MADE IMMEDIATELY. APPARENT SHIPPING DAMAGE SHOULD BE NOTED ON THE DELIVERY  

RECEIPT AND THE MATERIAL INSPECTED IN THE PRESENCE OF THE CARRIER’S REPRESENTATIVE. IF DAMAGE IS FOUND 

A CLAIM MUST BE FILED WITH THE CARRIER IMMEDIATELY.

NO WARRANTY WILL BE APPLY IF THE INPUT TO THE HEAT SECTION EXCEEDS THE RATED INPUT AS INDICATED ON 

THE NAMEPLATE BY MORE THEN 5%, OR IF THE HEAT SECTION IN THE JUDGMENT OF THE MANUFACTURER HAS 

BEEN SUBJECTED TO MISUSE, NEGLIGENCE, ACCIDENT, CORROSIVE ATMOSPHERES, ATMOSPHERES CONTAINING ANY  

CONTAMINANT (SILICONE, ALUMINUM OXIDE, ETC.), EXCESSIVE THERMAL SHOCK, PHYSICAL DAMAGE, IMPACT,  

ABRASION, UNAUTHORIZED ALTERATIONS, OR OPERATION CONTRARY TO THE MANUFACTURER’S PRINTED  

INSTRUCTIONS, OR IF THE SERIAL NUMBER HAS BEEN ALTERED, DEFACED OR REMOVED.

The following components are not covered by this warranty: cabinets, cabinet pieces, air filters, driers, refriger-

ant, wire fuses and unit accessories. 

FREIGHT DAMAGE IS NOT COVERED UNDER THIS WARRANTY.

WARNING: NO WARRANTY ON NEW UNITS INSTALLED BEHIND BRICK FACADES. IN YEARS PAST, IT WAS COMMON 

PRACTICE TO ADD A BRICK PATTERN FACADE (PIGEON HOLES) IN FRONT OF THE THRU-THE-WALL UNIT TO CHANGE 

THE EXTERIOR APPEARANCE OF THE BUILDING. ALL OBSTACLES ADDED TO IMPEDE AIR FLOW OF THE CONDENSING 

UNIT WILL DECREASE PERFORMANCE AND CAUSE PREMATURE EQUIPMENT FAILURE AND VOID ALL WARRANTIES. 

CONSULT FACTORY WITH ANY QUESTIONS.

This warranty gives you specific legal rights. You may also have rights which vary from state to state.

NATIONAL COMFORT PRODUCTS, BENSALEM, PENNSYLVANIA

 

NOTE: All warranty parts and paper work must be submitted no later than 

60 days after failure.  Warranty requests submitted after 60 days of failure 

will not be processed.

*All prices subject to change without notice.

17

                          

Warranty

 

Installation/Instruction Manual for Architects & Engineers

27.

Содержание Comfort Pack Electric



































Отзывы: