National Auto Tools NSS8XLT, Руководство по установке

Страница: 3 / 13

3
IMPORTANT SAFETY INSTRUCTIONS
Read these safety instructions entirely!
Failure to read these instructions may result in injury to user, other people
within the area of the lift, or vehicles. We are not responsible for any injury
or damage as a result of neglecting to carefully read and follow these
instructions.
Always lock the lift in place before going under the vehicle. Never allow
anyone to go under the lift when raising or lowering.
INSPECT your lift daily. Never operate if it malfunctions or if is has broken
or damaged parts. Repairs should be made with original equipment parts.
ATTENTION! LOOK OUT!
Routine check of safety latch system is very important - the discovery of
device failure before needed could save you from expensive property
damage, lost production time, serious personal injury and even death.
Operating controls are designed to close when released. Do not block open
or override them.
NEVER overload your lift. Manufacturer’s rated capacity is shown on
nameplate affixed to the lift. ALWAYS know the gross weight of vehicle.
NEVER use the lift to raise one end or one side of vehicle.
NEVER raise vehicle with anyone inside it. No one should be in the lift area
during operation.
ALWAYS keep lift area free of obstructions, grease, oil, trash and other
debris. Before lowering lift, be sure tool trays, stands, etc. are removed
from under vehicle. Release locking devices before attempting to lower lift.
Adequate ventilation should be provided when working on internal
combustion engines.
Use only manufacturer’s recommended attachments.
KEEP HANDS AND FEET CLEAR. Remove hands and feet from any moving
parts. Keep feet clear of lift when lowering. Avoid pinch points.
GUARD AGAINST ELECTRIC SHOCK. This lift must be grounded while in
use to protect the operator from electric shock. Never connect the green
power cord wire to a live terminal. This is for ground only.