Page 6
Natcomm
OPERATION SUMMARY
When a visitor at your door or gate presses the call button on your NATCOMM
Door Phone, DS2 will ring all of the telephones connected to your line up to 10
times (the number of rings can be changed).
By simply answering any ringing telephone on your line, you will be
immediately connected direct to your visitor, so that you can converse with
them.
If you have an ELECTRIC LOCK fitted, you can release it (open it) by pressing
** on your telephone.
If you are already on a telephone call and the Door Phone is activated by a
visitor, you will be alerted with a tone.
You can place your existing call 'ON HOLD' and switch to the DOOR PHONE
at your door or gate by pressing ## on your telephone.
You can return to the telephone call by pressing ## on your telephone.
If there is an incoming telephone call while you are on a DOOR PHONE call,
you will be alerted with a tone.
You can place your existing call 'ON HOLD' and switch to the telephone call by
pressing ## on your telephone.
To resume your original call, all you need do is press ## on your telephone
again.
DS2 COMMANDS
**
opens LOCK 1
##
switch between lines