NARGESA MC650, Инструкция, Страница: 31 / 82

- 30 -
SECTION BENDING MACHINE MC650
Use the numerical keyboard to make the adjustment to the height of the chosen axis. To confirm, press the
“ SET ” key.
As soon as you finish making the adjustments or corrections in the different steps (if necessary to finish
refining the resulting piece), you can return to production mode and begin the series.
To do so, remember to press the icon in the vertical menu at the right. After doing this, you ’ ll see how it
changes to this
Now, using the navigation keys or directly pressing on the step tab, find the position over the first one.
You
’ re now ready to begin producing.
As soon as you press the movement button, the hydraulic pump will start up and the rollers will move to the
defined height. The X roller always moves first and then the Y roller. When both axes reach the defined
heights, the movement stops and you can release the button. This is the loading step. You can now load
the profile or pipe to be bent into the machine. Now go to step 2. Press the button until the rollers reach the
defined height and the clamping step is finished. If you wish, move the profile or pipe to be bent frontwards
or backwards by pushing the movement button and moving the joystick to the left or right.