NARGESA MC650, Инструкция, Страница: 22 / 82

- 21 -
Now, you just need to complete the information by pressing on each of the items that appear on
screen. They are:
1. - The type of profile (top).
2. - Dimensions and material (middle).
3. - Rollers used and their position on each axis (bottom).
4. - Custom roller (data only visible for custom profiles).
A miniature view of the different options available appears on screen upon pressing the profile. Press the
corresponding image to select the desired profile.
Remember the following data may vary based on the type of profile chosen. In other words, to define the
dimensions when selecting a solid square profile, you must enter height and width. To define the dimen-
sions when selecting a hollow square profile, however, you must enter height, width and thickness. Like-
wise, you must enter the diameter if you choose round profiles.
As can be observed, it is a dynamic information menu which adapts in real time to the choices you make.
A screen like the one below will appear when you press the dimensions icon. To complete the data, you
only need to press on each one of the textboxes and use the virtual keyboard that appears to enter the co-
rrect values.