NARGESA MC650, Инструкция, Страница: 24 / 82

- 23 -
Using this interface, you can flip each one of the rollers (by pressing the arrow above them) and place them
on the axis (by pressing the desired roller). Keep in mind that the order in which you press each one of the
rollers will be the order in which they will be inserted on the axis.
As already mentioned, you ’ ll see a different picture of the rollers if you selected a round profile or a custom
profile in a prior step since it is a dynamic information menu.
Press the OK button when the configuration is correct and you will have completed one axis. By repeating
these steps, you may define the roller configuration for the remaining axis.
After completing all the information necessary, you can return to the manual mode or automatic mode ope-
rating screen by pressing on the corresponding icons in the vertical menu.
Manual mode
Automatic mode
5.3.3. Using the Programs
Since many jobs currently need to be done with the same machine, the profile bender allows you to save
and load all the programs used with it. Thus, repeating pieces made previously is as easy as loading the
corresponding program and switching to production mode.
The name of the program being used will appear at the top left of the screen (in automatic mode) and so-
metimes the
“*” indicator will be displayed at the end. This indicator warns the operator that data has been
modified yet not saved to the hard drive. In other words, you can load a program and modify it to make an
isolated piece yet not save it. Or you can save it if you want to keep the change. It
’ s your choice.
To save the program, you must press on the name of the program (text at the top left) and a virtual key-
board will appear to enter a name if it hadn
’ t ever been saved. If, on the contrary, you had already chosen a
name previously, it will be saved on the hard drive and the “*” indicator will disappear upon pressing the
name.