NARGESA MC650, Инструкция, Страница: 21 / 82

- 20 -
SECTION BENDING MACHINE MC650
Automatic operating mode allows you to create and save bending programs for mass production with the
possibility of multiple radiuses on each piece. This operating mode is an evolution over the manual opera-
ting mode and, as seen below, it is also simple and powerful.
As can be seen at the bottom of the graphic interface, the active mode menu has changed. Now, in addi-
tion to the hydraulic pump control and system reset icons, there is an icon to save steps, one for general
data and another for program management.
Save steps General data Program management
5.3.2.1. General Data
When bending a certain piece using a program, you need to know the type of profile used, the dimensions
it had, the material, the position and rotation of each of the rollers used on the different axes in order to re-
plicate the piece later.
This information can be added for each one of the programs used. To do so, press the button on the
horizontal menu on the automatic operation screen.