NARGESA C2006, Руководство пользователя, Страница: 20 / 71

C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 19
The hold-down plates are lowered by pressing the machine pedal. Once the sheet is fixed in place between
the hold-down plates and the machine table, the gauge will retract a few millimetres. Next, the blade is
lowered and cuts the sheet. In this way the sheet is not subjected to unnecessary friction during the cutting
operations and the sheet can be released so it can fall to the extraction ramp by gravity. Once the cut has
been made, the machine will order the blade and the hold-down plates to be raised. Once the blade is in
the rest position, the gauge will automatically return to the programmed position.
This function can be enabled or disabled in both the manual (single and continuous) and automatic modes.
5.6. Light
The cutting area has an LED light to significantly improve visibility when operating the machine.
Press the button to turn it on.
The light bulb icon is activated when doing so, as shown in the following screen shot.
Press the button to turn the light off.
5.7. Laser
The laser line is activated by pressing . The laser light is turned on and generates a laser cutting line.
The laser is very useful for cutting parts that are not square, or when making cuts that do not reach the end
position.
Press the button to turn the laser off.