NARGESA C2006, Руководство пользователя, Страница: 18 / 71

C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 17
Enter the gauge dimensions required using the number keys and then press . Next, follow
the same procedure to enter the cut length, material and thickness data and press . The machine will
then position the X-axis at the required location and the following screen will appear.
The operational system (continuous or single) can also be selected during the manual mode, as can be
observed in the previous image. The manual mode is selected by default.
The mode can be changed simply by pressing
The single operational mode works in the following way:
The blade is lowered while the operator presses down on the pedal. If the pedal is released, the blade
reverses and is raised until it reaches the upper rest position.
To cut a sheet in this operational mode, the pedal is pressed down until the blade moves to the lowest
position of the vertical cut. Once in this position, the sheet has been cut and the blade has reached the
base. However, the blade will not be raised until the operator releases the pedal. If the operator releases
the pedal, the blade will move vertically until it reaches the upper rest position.