English
12
Charger AN 600
Original operating manual (EN)
Device Description
1 �������Accumulator Battery
2a �����Charger
2b �����Charger power cable
3 �������Charge LED indicators
The accessories displayed or described here may not be in-
cluded in the delivery.
Table of contents
Device Description ............................................................................12
General Power Tool Safety Warnings .............................................12
Charger safety warnings ..................................................................13
Use .......................................................................................................13
Double insulation ..............................................................................13
Accumulator Battery Charge Instructions .....................................13
Maintenance and service .................................................................14
Storage ................................................................................................14
Environmental protection ................................................................14
Warranty .............................................................................................14
Certificate of Conformity ..................................................................15
Technical Information
Type
AN 600
Input voltage (V)
100–240
Frequency (Hz)
50–60
Power input (W)
190
Output voltage (V)
63
Electric charge current (A)
2�5
Recommended batteries
AP 607, AP 610
Charge time (min):
AP 607
about 60
AP 610
about 80
Weight (kg)
0�59
Protection rating
II /
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference!
The term “power tool” in the warnings refers to your mains-operat-
ed (corded) power tool or battery-operated (cordless) power tool�
1) Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark areas
invite accidents.
b)
Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Pow-
er tools create sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while operating a pow-
er tool.
Distractions can cause you to lose control.
2) Electrical safety
a)
Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is
an increased risk of electric shock if your body is earthed or
grounded.
c)
Do not expose power tools to rain or wet conditions.
Water
entering a power tool will increase the risk of electric shock.
d)
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.
Damaged or
entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for out-
door use reduces the risk of electric shock.
f)
If operating a power tool in a damp location is unavoida-
ble, use a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a)
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication.
A moment of inattention while oper-
ating power tools may result in serious personal injury.
b)
Use personal protective equipment. Always wear eye pro-
tection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appro-
priate conditions will reduce personal injuries.
c)
Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or bat-
tery pack, picking up or carrying the tool.
Carrying power
tools with your finger on the switch or energising power tools
that have the switch on invites accidents.
d)
Remove any adjusting key or wrench before turning the
power tool on.
A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e)
Do not overreach. Keep proper footing and balance at all
times.
This enables better control of the power tool in unex-
pected situations.
f)
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g)
If devices are provided for the connection of dust extrac-
tion and collection facilities, ensure these are connected
and properly used.
Use of dust collection can reduce dust-re-
lated hazards.
4) Power tool use and care
a)
Do not force the power tool. Use the correct power tool for
your application.
The correct power tool will do the job better
and safer at the rate for which it was designed.
