EN
W415-2007 / A / 10.21.19
17
fi nishing
A.
Place the 2 side castings and the centre casting face down on a protected surface and assemble as
shown (FIG 1).
B.
Line up the casting holes with the casting bracket holes and secure in place using the screws. Secure the
casting support to the casting bracket using the screws (FIG 1, A).
C.
Loosely secure the screws to the holes in the side casting (FIG 1, B). Repeat on the other side.
D.
Using screws, secure the 4 retaining brackets in place (FIG 2, C).
E.
Lift the casting, place the screws into the retaining brackets, and tighten fully (FIG 2, D).
4.3
surround installation, traditional cast
A
D
B
C
Fig. 1
Fig. 2
To ensure the joints are fl ush, adjustment may be necessary. To adjust the cast components, loosen the
screws and then align the casting to desired position.
note:
Содержание Oakdale EPI3-1 Series
Страница 41: ...EN W415 2007 A 10 21 19 41 10 0 notes ...
Страница 83: ...W415 2007 A 10 21 19 83 FR 10 0 notes ...