manualshive.com logo in svg

Napoleon Madison GD80NT, Инструкция по установке и эксплуатации

Поделиться
Скачать
Napoleon Madison GD80NT Скачать руководство пользователя страница 25

25

W415-0695 / 05.12.08

4

BRACKET

NOTE:

For propane, remove the screw from the #3 log support bracket. Move the bracket to 
the right most location, then install the log.

5

4.

 Place log #4, with the charred branch pointed inward. Locate 

the pins into the holes in log#1 and log#2, this will hold the rear 
log in position.

5.

 Place the end of log #5 on the right end of log #1. The fork 

in the log should straddle the knot on top of log #2.

6.

 Replace the glass door and screen assembly.

Glowing embers are NOT recommended. The burner has been designed to achieve maximum glow without embers.

Charcoal provided could be randomly placed on the fi bre hearth on both sides of the burner, and across the front, especially 
at the hearth joint.

Log colors

 

may vary. During the initial use of  the fireplace, the colors will become more uniform as color pigments 

burn in during the heat activated curing process.

Positioning the logs improperly will cause flame impingement and carboning.

Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. 

PHAZER

TM

 logs glow when 

exposed to direct fl ame. Use only certifi ed 

PHAZER

TM

 logs available from your Authorized dealer. 

GLOWING EMBERS

CHARCOAL EMBERS

Содержание Madison GD80NT









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды