W415-2978 / 02.16.21
EN
28
fi nishing
!
WARNING
•
Risk of fi re! Maintain all specifi ed air space clearances to combustibles. Failure to comply with these
instructions may cause a fi re or cause the appliance to overheat. Ensure all clearances (i.e. back, side, top,
vent, mantel, front, etc.) are clearly maintaned.
•
Never obstruct the front opening of the appliance.
•
When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
TOP OF
APPLIANCE
MANTEL
6”
4”
2”
20 1/2”
18 1/2”
16 1/2”
14 1/2”
35 3/4”
16 1/2
14 1/2
8
4
2
18 1/2
20 1/2
8
6
10
MANTEL
DEPTH
MANTEL
HEIGHT
1”
8”
8”
We recommend all mantels be made from non-combustible material. However, if using combustible materials,
follow the chart below.
9.3
minimum mantel clearances
Mantel temperatures will rise above normal temperatures and may be hot to touch.
note:
9.4 logo
placement
½"
(12.7mm)
½"
(12.7mm)
½"
(12.7mm)
½"
(12.7mm)
Remove the backing of the logo supplied. Centre the
logo on the front of the appliance and ½” (12.7mm) in
from the left side, as shown.