Napoleon DHCP-BK, Инструкция по установке и эксплуатации

Страница: 4 / 72

W415-1789 / C / 01.29.19
EN
4
installation planning
1.3 DHC™ Plus kit overview
Included in each kit:
DHCP-BK DHCP-EK DHCP-HK
1 x blower housing assembly
1x inline cover assembly
1 x air damper assembly
1 x on/off switch / housing
1 x collar connector assembly
1 x collar plate assembly
2 x mounting bracket
1 x bushing
13 x #9x1/2” screws
7 x #8x1/2” screws
1 x exterior housing assembly
1 x wall flashing
1 x decorative cover
12 x #9x1/2” screws
1 x hot air exhaust assembly
1 x wall flashing
4 x #9x1/2” screws
2 x #10x1-1/2” screws
#9-14 Thread, RH
Hex
#9-14 Thread, RH
Hex
#9-14 Thread, RH
Hex
#10 Thread, RH
29/64” 1/8” 1-1/2”
Quadrex Drive
These complete kits always comprise of up to 2 boxes. Please read carefully and ensure to order correct ap-
plication kits for your unique installation.
note:
7
2 3 4 5
6
1
8
#9-14 Thread, RH
0.141”
Hex
0.348”
9
1.3.1 DHCP-BK
Though not supplied, armoured cable is required for the wiring of the DHC™ Plus (see “electrical information”
section for more information). Therefore, please ensure you have enough armoured cable on-hand to complete
your unique installation.
Ref. Description Ref. Description
1 Hardware kit 5 Collar plate assembly
2 On/off switch (with housing and nut) 6 Collar connector assembly
3 Air damper assembly 7 Inline cover assembly
4 Mounting brackets (x2) 8 Blower housing assembly
9 Bushing
Installation Type DHCP-BK DHCP-EK DHCP-HK
Exterior N/A
Remote Exterior N/A
Remote Inline N/A
The table below lists kit requirements for each installation option. Please read it carefully.