EN
W415-1767 / F / 07.20.18
7
general information
1.5
unpacking and testing appliance
Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance
operates properly by plugging the power supply cord into a conveniently located 120 volt, 15 amp grounded
outlet.
The appliance comes with medium density fiberboard (MDF board) installed on the sides. Remove fasteners on
each side
(Fig. 1)
, and then discard both MDF boards.
Use 4 new fasteners (supplied) on each side to cover MDF board fastener holes
(Fig. 2)
.
Caution: The
MDF board is
used for
packaging only
.
#2 x 8
Caution Label
W385-2236
Fig. 1
Fig. 2
