W415-1767 / F / 07.20.18
EN
10
installation
Measurements are taken from the front trim
Bottom
0”
Sides
0”
Front / Back
6” (152.4mm)
Top
8” (203.2mm)
•
When using paint or lacquer to finish the mantel, the paint or lacquer must be heat resistant to prevent
discoloration.
!
WARNING
8” (4.5” for Deep Trim)
SIDE VIEW
MANTEL
8”
WALL
SIDE VIEW
1MM GAP
8” (203.2mm
Grounding Methods
Metal Screw
(A)
Not allowed in Canada
Grounding Means
Adapter
Grounding Pin
Cover of
grounded
outlet box
(C)
(B)
This appliance is for use on 120 volts. The cord has a plug as shown in (A). An adapter as shown in (C) is available
for connecting three-blade grounding type plugs to two-slot receptacles, as shown in (B).
The green grounding plug extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove plug from outlet.
2.2
grounding the appliance
2.3
minimum clearance to combustibles
2.4
minimum mantel clearances
8” (203.2mm) for standard trim
4.5” (114.3mm) for deep trim
8” (203.2mm)
