manualshive.com logo in svg

NAPCO XP-400, Руководство по установке

Поделиться
Скачать
NAPCO XP-400 Скачать руководство пользователя страница 2

2

WI853C XP-400 Installation Instructions

*HQHUDO ,QIRUPDWLRQ

The NAPCO EXPRESS XP-400 control panel pro-
vides up to 4 hardwired/wireless zones.  Up to four
4-digit user codes can be programmed.  Ambush,
when selected, uses User 4 code as an Ambush
code.

The XP-400 is wireless ready. When used with a
GEM-RECV-XP8 receiver, the control panel can sup-
port up to 4 wireless zones and 2 Keyfobs.

The RPX-4 keypad provides complete control of the
XP-400 control panel.  Information on system status,
bypassed zones, system troubles etc. can be viewed
at the keypad.

The control panel can be easily and quickly pro-
grammed from the keypad.  The panel can also be
locally or remotely downloaded using PCD3000 soft-
ware and a PCI 2000/3000 interface or PCL2000A
local Download cable.  See Downloading Section (pg.
5) for more information.

;3 )HDWXUHV

Control Panel

• 

4 Zones

• 

3 Keypad Panics

• 

Wireless Ready

• 

Bell Supervision

• 

Line Cut Detection

• 

Answering Machine Override (Second Call)

Communicator

• 

2 Telephone Numbers

• 

Backup Reporting

• 

Pager Format

• 

Point ID Format

• 

Individually Report 4 Users

• 

Opening after Alarm Report (Cancel Code)

• 

Conditional Closing Report

For Technical Assistance, Contact the NAPCO Toll Free Helpline

 

(800) 645-9440

NAPCO Security Systems, Inc.

333 Bayview Avenue  

z Amityville, New York 11701

For Sales and Repairs, call Toll Free: (800) 645-9445

7DEOH RI &RQWHQWV

General Information..........................................2
XP-400 Features ..............................................2
Specifications ...................................................3
Listings and Approvals .....................................4
Ordering Information ........................................4
Optional Accessories........................................4
Programming the Panel....................................5
Installation ........................................................6
Wiring...............................................................6
Keypad Operation ............................................7
Panel Operation ...............................................7
Bypassing ........................................................8
User Program Mode .........................................9
XP-400 Commands ..........................................10
Dealer Commands  ..........................................11
Wireless Operation  (Signal Strength)  .............11
Zone Features ..................................................11
System Times ..................................................13
System Features ..............................................13
Telephone Number 1 Programming..................15
Pager Programming .........................................15
Backup Telephone Programming .....................17
Telephone Number 3 Programming..................18
Report Codes ...................................................18
Enhanced Communicator Features ..................19
Wireless ...........................................................19
Downloading.....................................................21
Dealer Programming ........................................22
System Troubles ..............................................23
Troubleshooting................................................25
XP-400 WIRING DIAGRAM..............................27

Wi853c 
page 2

Tuesday, September 16, 1997 10:42 

Содержание XP-400





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды