NAPCO GEM-RP8LCD, Руководство по эксплуатации

Страница: 17 / 32

17
P R O G R AM M I N G ( O P T I O N A L )
Enter the User Program Mode
USER PROGRAM MODE is accessed through the Function Menu.
1. To enter the Function Menu, press
R
.
2. Skip through the functions by pressing
R
until
ACTIVATE PROGRAM
is displayed.
3. Press
U
and enter a valid User Code followed by
U
.
4. When “
USER PROG. MODE USERS=1...
” displays, the system is ready for USER
CODE programming. Note: The window will display all previously programmed
user numbers. (For example, it may display “
USER PROG. MODE USERS=1 34 6
”,
displaying users 1, 3, 4 and 6 whose codes are already programmed).
•
To return to normal keypad operation, press the
C
button.
•
Note: A keypad shortcut of
R 8
can be used to proceed directly to USER
PROGRAM MODE without the need to browse through the Function Menu.
Programming / Reprogramming a User Code
(Note: See example images at left)
1. Enter the digit of the user number to be programmed (for example, “2”)
2. Enter the new 4 digit User Code (for example, “1539”. The new User Code is
Program Mode
Your Installer has programmed into your system a special User Program Code which can be used to not only Arm and Disarm
the system, but also to enter the User Program Mode, where you can program other User Codes. The following explains how
you will use this code to program or erase additional User Codes:
A C T I V A T E
P R O G R A M
U S E R P R O G . M O D E
U S E R S = 1 3 4 6
E N T E R C O D E F O R
U S E R 2
. . . .
E N T E R C O D E F O R
U S E R 2
1 5 3 9
U S E R P R O G . M O D E
U S E R S = 1 2 3 4 6