December 2008
Document #: 720002-0000R
iii
Information to the User
This equipment must be installed and used in strict accordance with the manufacturer's instructions.
However, there is no guarantee that interference to radio communications will not occur in a particular
commercial installation. If this equipment does cause interference, which can be determined by turning the
equipment off and on, the user is encouraged to contact Nanoptix Inc. immediately.
Nanoptix Inc. is not responsible for any radio or television interference caused by unauthorized modification
of this equipment or the substitution or attachment of connecting cables and equipment other than those
specified by Nanoptix Inc. The correction of interferences caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
In order to ensure compliance with the Product Safety, FCC and CE marking requirements, you must use
the power supply, power cord, and interface cables, which were shipped with this product or which meet the
following parameters:
Power Supply
UL Listed power supply with standard 60Hz-50Hz, 100-240VAC input and 24VDC output equipped with AC
line filtering, over-current and short-circuit protection.
Use of this product with a power supply other than the Nanoptix Inc. power supply will require you to test
the power supply and Nanoptix Inc. printer for FCC and CE mark certification.
Communication Interface Cable
An approved Nanoptix interface cable must be used with this product. Use of a cable other than Nanoptix
approved product will require that you test the cable with the Nanoptix Inc. printer and your system for FCC
and CE mark certification.
Power Cord
A UL listed, detachable power cord must be used. A power cord with Type SVT marking must be used. For
applications outside the North America, power cords that meet the particular country’s certification and
application requirements should be used.
Use of a power cord other than described here may result in a violation of safety certifications that is in
force in the country of use.
Industry Canada (IC)
Radio Frequency Interference Statement
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
