December 2008
Document #: 720002-0000R
6
2.2 Calibrate Printer
Depending on the manufacturing of the paper, there may be small variations in the intensity of the
index mark located on the back of each ticket.
If the intensity falls outside of the pre-calibrated range of the printer, the printer will need to be re-
calibrated. This will be obvious by the printer either cutting the tickets in the wrong location or the
printer feeding multiple tickets.
To calibrate the printer following these steps:
1.
Separate the ticket that is in the print head from the stack on the perforated line.
2.
Press the Paper Feed Button to eject the ticket that is in the print head.
3.
Take a single ticket from the stack and insert it in the input paper guide the same manner
as loading a new stack of paper. The printer will feed the single ticket to the output tray.
4.
Re-feed the existing paper stack as described in Section 2.1.
Figure 5: Top view with arrow pointing towards output tray.
The printer will now be re-calibrated for the intensity of the current paper.
