December 2008
Document #: 720002-0000R
9
2.6 Testing the Printer
Run this test to check the printer. The test prints and cuts a resident test ticket. Verify this ticket to
judge the printing quality.
Figure 9: Status Ticket
To print the test ticket, power-on the printer while pressing and holding the Paper Feed Button for
approximately 5 seconds. A test ticket similar to above will be printed approximately 3 seconds
after. Press the paper feed button once more and the ticket will feed. Pressing the button again
will result in blank tickets.
Model: PAYCHECK
HSC
Firmware: HSC-3.58Z
(0xD5F7)
*
Protocol: ITHACA
950
COMMUNICATION
Interface:
Serial
Baud:
9600
Data Bits:
8
Parity:
NONE
Handshaking:
PRT+XON+RTS
Print Mode:
Line
PRINT CONTROL
Print Method:
No HPQ
Speed:
200 mm/sec
Black Bar Index:
Right
No HPQ Burn Time:
275 us
Clear After Cut:
254 steps
Cutter PWM:
80 %
Motor Current:
3
Real Time Command:
Disabled
Validation Bit:
After Barcode
Cut Cal. (Auto):
161+258 steps
PRINTER ENVIRONMENT CONDITIONS
Voltage:
24.4 Volts
Temperature:
20 Celsius
SYSTEM RESOURCES
FLASH: Used=00000
RAM: Used=00000
Free=65535
Free=65535
LIBRARY INVENTORY (HSC)
Templates:
0,1,2,3,4,5,6,7,8,9,A,B,D,
E,F
Regions:
1,2,3,4,5,6,7,8,h,9,A,B,C,
D,E,F,G,I,J,K,L,N,O,P,Q,R,
S,T,U,Z,X,a,b,c,d,e,f,g,i,
j,k,l,m,n,o,p,q,r,s,t,u,v,
w,x,y,z
Fonts:
0,1,2,3,4,5,7,8,9,A,B,E,P
Graphics:
MANUFACTURING INFORMATION
Printer ID:
PC00014
Date Code:
20080623
A to D: 03cc,01e6,01f8,03ce
* S | 0 | HSC-3.58Z | @ | @ | @ | H | @ | P | *
* Indicates the Firmware CRC *
