INCLUDED ITEMS
YOU WILL NEED THE FOLLOWING ITEMS TO GET FLYING
NANO SHARK KIT
CONTENTS
of the
All Depron Parts with Graphics
Elevator and Aileron Push-rod wire
Three Micro Control Horns
All necessary wood parts
Carbon fiber wing spar and elevator spars
Fully illustrated building instructions
Little Screamers Brushless motor and 12 amp brushless speed controller
Four channel radio receiver and 2 micro/parkflyer servos
APC prop 6 x 5.5 and 3mm prop adapter
900 - 1320 mah 3 cell lipoly battery pack or similar - high discharge 12C +
Foam safe / odorless CA (UFO brand highly recommended)
Lightweight Spackling or hobby filler
Hinge tape or Scotch tape
Please note:
The graphics on this kit may vary in color and
design from the photos used in this manual
