Follow these instructions carefully and step by step. The rigging lines of the boat could tangle easily
so do not undo the lines until instructed.
1.
Unwrap the hull and stand. Place the hull into the stand with the hull facing forward to your right. Keep the
starboard side of the boat facing you in order to follow the instructions and to compare with the diagrams.
1a.
Study the open eyes of A, B, C, D, E, & F. There are also two eyes on the back transom of the boat for the
rudder. They each have a fi xed position that corresponds to different rigging lines and sail sheets of the boat. See
photo (1)
2.
Unwrap the rudder w/tiller. You will fi nd two bent wires to represent pintles on the rudder. Place
these down through the two eyes on the transom of the boat. See photo (2)
INTERNATIONAL LIGHTHING
ASSEMBLY INSTRUCTIONS
