NANO CAM NCP-DVRGPS, Руководство пользователя

Страница: 19 / 34

19
3.1.7 Colour
The Colour setting is used to set the colour palette. To change the Colour setting
follow the instructions below.
1. Enter the Photo screen.
2. Press the
M
Button to enter the Photo Menu .
3. Use the
<
and
>
Buttons to navigate the
Photo Menu and highlight the Colour
setting and press
OK
to select.
4.
Use the
<
and
>
Buttons to highlight your required colour setting, then press the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu , please make sure that you
are in the
Photo screen
when you access the menu.
3.1.8 ISO
ISO is used to manage how much light is let into the image sensor. Setting a higher
ISO will let in more light and blurred movement and lower ISO will capture less
movement and less light. To change the ISO setting follow the instructions below.
1.
Enter the Photo screen.
2. Press the
M
Button to enter the Photo Menu .
3. Use the
<
and
>
Buttons to navigate the
Photo Menu and highlight the ISO
setting and press
OK
to select.
4. Use the
<
and
>
Buttons to highlight your required ISO setting, then press the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu , please make sure that you
are in the Photo screen when you access the menu.