NANO CAM NCP-DVRGPS, Руководство пользователя

Страница: 20 / 34

20
3.1.9 Exposure
Exposure is used to manually control the light settings. To change the Exposure
setting follow the instructions below
1. Enter the Photo screen.
2. Press the
M
Button to enter the Photo Menu .
3. Use the
<
and
>
Buttons to navigate the
Photo Menu and highlight the ISO
setting and press
OK
to select.
4.
Use the
<
and
>
Buttons to highlight your required exposure setting, then press
the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu , please make sure that you
are in the Photo screen when you access the menu.
3.1.2.0 Anti Shaking
The Anti Shaking setting uses the on board chipset to correct some of the blur
caused but handheld photography. To enable Anti Shaking follow the instructions
below.
1. Enter the Photo screen.
2. Press the
M
Button to enter the Photo Menu .
3. Use the
<
and
>
Buttons to navigate the
Photo Menu and highlight the Anti
Shaking setting and press
OK
to select.
4. Use the
<
and
>
Buttons to highlight either OFF or ON, then press the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu , please make sure that you
are in the Photo screen when you access the menu.