G-15
05-E3B, 05-E3BG, WSM
G GENERAL
Replacing Oil Filter Cartridge
CAUTION
• Be sure to stop the engine before changing filter cartridge.
1. Remove the oil filter cartridge with the filter wrench.
2. Apply a slight coat of oil onto the new cartridge gasket.
3. To install the new cartridge, screw it in by hand. Over tightening
may cause deformation of rubber gasket.
4. After the new cartridge has been replaced, the engine oil
normally decrease a little. Thus see that the engine oil does not
leak through the seal and be sure to read the oil level on the
dipstick. Then, replenish the engine oil up to the specified level.
IMPORTANT
■
• To prevent serious damage to the engine, replacement
element must be highly efficient. Use only a KUBOTA
genuine filter or its equivalent.
W1018617
Checking Radiator Hoses and Clamp Bands
1. Check to see if the radiator hoses are properly fixed every 200
hours of operation or every six months, whichever comes first.
2. If the clamp is loose, apply oil to the threads and retighten it
securely.
3. The water hose is made of rubber and tens to age. It must be
replaced every two years. Also replace the clamp and tighten it
securely.
W1029518
Checking Intake Air Line
1. Check to see if the intake air hose(s) are properly fixed every 200
hours of operation.
2. If the clamp is loose, apply oil to the threads and retighten it
securely.
3. The intake air hose(s) is made of rubber and tends to age. It must
be changed every two years. Also change the clamp and tighten
it securely.
IMPORTANT
■
• To prevent serious damage to the engine, keep out any dust
inside the intake air line.
W1029631
(1) Upper Hose
(2) Lower Hose
(1) Intake Air Hose
(2) Clamp
KiSC issued 12, 2007 A
