© by N&W GLOBAL VENDING S.p.A.
19
05-2015 3625 01
DIsPlay oN TRays
Available for some models only.
The displays on trays can show:
-
selection number
-
product code / name
-
the price
-
a promotional message (beneath the selection) or an
“info” message (along the whole length of the tray).
Messages are displayed in alternation with the number
and the price of the selection.
-
the selections (flashing on and off) that have performed
an "extra" rotation to facilitate the product release or
the latest "motor state" of the selection (motor locked,
empty spiral, ...)
These messages are displayed as soon as the ma
-
chine is powered on and/or while loading products).
coNfiguratioN
To manage the displays properly, number the trays
properly.
To number the trays, act as follows:
-
Open the glassfront and hold the door open signalling
actuator down while powering on the machine.
-
Wait for the machine to carry out initial checks
-
Press and hold the programming key down (for 2 sec
-
onds); it is arranged on the right side of the tray display.
-
Release the programming key.
-
Press the programming key of the display once again to
scroll numbering (the display of the tray shows 1, 2, 3,
...) and set the tray number.
Upper trays are lower-numbered.
Fig. 20
promotioNal
mEssagE
sEtup
Promotional messages (maximum 5) can be set and
associated with every single selection with the functions
relative to the "electronic labels" of the Technician menu.
As an alternative, promotional messages can be set
up and associated with the selections by means of an
EVADTS file with the following syntax:
mc
5*
epd
_
pro
_
msg
*
numero
_
msg
*
messaggio
*
sel
1*
sel
2*
Where:
-
numero
_
msg
:
it is the message number (max. 5)
-
message
:
it is the body of the message to be displayed
(12 characters)
-
sel
1
and
sel
2
are the number of the selections to be
associated with the promotional message.
for instance:
mc
5*
epd
_
pro
_
msg
*2*
promozione
*13*33*43*73
will display message 2 “
promotion
” beneath selections
13, 33, 43 and 73.
iNfo
mEssagE
sEtup
the “info” message can be set only by means of an
EVADTS file with the following syntax.
mc
5*
epd
_
msg
_
inf
*
numero
msg
*
abilitazione
*
messaggio
Where:
-
msg
number
:
it is the “info” message number (from 1 to
5).
-
enable
:
value 0 (zero) disables the message; value 1
enables the message.
-
message
:
it is the body of the message to be displayed;
the message is displayed in the middle of the tray.
If the first character is a space, the message will be
aligned on the left.
for instance:
mc
5*
epd
_
msg
_
inf
*3*1*
prodotti
senza
glutine
”
will display message 3 “gluten-free products” on all trays.
