background image

Nana Wall Systems, Inc.
100 Meadowcreek Drive #250
Corte Madera, CA 94925

800 873 5673
415 383 3148
Fax 415 383 0312

[email protected]
nanawall.com

©2022 Nana Wall Systems, Inc.

NanaWall Warranty Registration

Must be filled out and returned to Nana Wall Systems, Inc., 100 Meadowcreek Drive, Corte Madera, CA 94925 
within 30 days from date of purchase of the NanaWall in order for the limited warranty to become effective.

NANAWALL ORDER #

 ________________________

PROJECT NAME 

 _____________________________

Date of Purchase

 _____________________________

Purchaser Name 

 ______________________________

PROPERTY OWNER

Name 

 _____________________________________

 Address 

 ____________________________________

Telephone 

 _________________________________

 E-mail 

 ______________________________________

Project Address (if different from above) 

 ____________________________________________________________

INSTALLATION

Installer Name 

 ______________________________

Address 

 ____________________________________

Telephone 

 _________________________________

E-mail 

 ______________________________________

Type of project 

new residential

restaurant

shopping mall

residential remodel

office building

other 

 ___________________________

Architect Name 

 _____________________________

Address 

 ____________________________________

1. Is the installation complete?

yes

If yes, date completed 

 ________________

no

If no, date scheduled 

 _________________

2. Have you been shown how to

yes

Is operation satisfying?    

 

yes     

 

no

operate your new NanaWall?

no

If no, why not? 

 ________________________________

Print Name

 _________________________________

Signature

 __________________________________

Date 

 _______________________________________

Содержание HSW75























Отзывы: