NAMCO WORLD KICKS, Руководство оператора

Страница: 69 / 86

Page 69
8-7 Replacing the Joystick Potentiometers
1. Remove the Joystick Assembly. (see 8-6 page 67)
2. Remove 4off pozi head self tapping screws and remove the potentiometer
bracket complete with potentiometer.
3. Remove the set screw using the hex wrench (diagonal 1 /
16
inch) supplied, and
remove the group follower. (The diagram below shows the horizontal direction
potentiometer, but the vertical direction potentiometer can be removed in the
same way).
4. Remove the potentiometer nut, washer, spacer and bracket.
5. Replace the potentiometer and reassemble in reverse order.
•
When replacing the Group Follower or Group Rider, ensure that the set screw
engages on the flat of the potentiometer shaft.
•
When refitting the horizontal direction potentiometer, align the universal joint with
the grooves in the group follower and joystick.
After replacing, always check the operation and settings. (see 6-2-3 (d) page 51)
Hex pozi head
self tapping screw
Vertical direction
potentiometer
Horizontal direction
potentiometer
Hex pozi head
self tapping screw
Potentiometer bracket
Universal joint
Group rider
Group follower
Potentiometer
Potentiometer bracket
Spacer
Washer
Potentiometer nut
Set screw
Group follower