NAMCO TIME CRISIS 2, Руководство по эксплуатации

Страница: 53 / 96

8. MAINTENANCE
( 2 ) Replacing the monitor with a new one
represents something that must not be touched.
Before carrying out this task, always off the power switch to prevent workers and people around
them from getting an electric shock, accident. or and protect the electric circuit from damage.
. Some parts in the monitor have voltages of more 20,000 bolts and might give you an electric
shock. Therefore do not touch anything inside the monitor.
. The anode cap, anode lead, and retain high voltage power-off. Never touch
any of them, because might give you an electric shock.
l
not touch anything other than the stay, angle, and monitor CRT surface when replacing the monitor
with a new one.
e cap approx. 29,000V
Anode lead approx.
Focus lead approx. 10
transformer
approx. 29,000v
Angle
e cap approx.
Anode
lead
approx.
Focus lead approx.
transformer
approx.
l
The
m o n i t o r
circuitry is divided into a primary and a secondary, which are electrically insulated from
each other. Do not touch the primary. Do not touch the primary and secondary at the same time (thus
short-circuiting them). This might cause an electric shock or breakdown, thus being dangerous.
Secondary (chassis sheet panel, CRT,
l
Primary (main
Secondary sheet panel, CRT, etc.)
Primary (main
If solder dust. paper dust, or other foreign matter is found inside the monitor, turn off the power switch
the monitor shows any disorder, off the power switch immediately and contact your dealer.
The monitor weighs about 40kg. This work must be conducted by at least workers.