NAMCO TIME CRISIS 2, Руководство по эксплуатации

Страница: 40 / 96

7. OPERATING MACHINE
MONITOR TEST
The MONITOR TEST performs various adjustments on the monitor.
(See P-55, 8-3-l (3) “Adjusting the monitor.“)
While on the MENU screen, select MONITOR TEST and press the enter switch. The
TOR TEST screen will then appear.
MONITOR TEST
PATTERN
CROSSHATCH (CRT)
PATTERN - -
W-SITE
WINDOW
WINDOW
INTERLACE PATTERN
ANGLE ADJUST (CRT)
ANGLE ADJUST
(PROJECTOR)
WRITE
STLECT SW:CHOOSE ENTER
MONITOR TEST screen
q
With the select switch, choose an option. The selected option will blink.
Press the enter switch to display the corresponding pattern. To get out of the pattern screen,
press the enter switch again.
(a) Displays a gradation pattern.
(b) Displays a crosshatch pattern for CRT monitor. (This is not used for projectors.)
(c) Displays a crosshatch pattern for projectors. (This not used for CRT monitors.)
(d) Displays white window or high).
(e) Displays the white or medium).
Displays the white window (L. or low).
(g) Displays an interlace pattern.
(h) Displays an adjustment screen for CRT monitors. (This is not used for projectors.)
(i)
Displays adjustment screen for projectors. (This is not used for CRT monitors.)
Displays white all over the screen.
q
Select EXIT and press the enter switch to go back to the MENU screen.
38