NAMCO TIME CRISIS 2, Руководство по эксплуатации

Страница: 36 / 96

7. OPERATING THIS MACHINE
tests for switches TEST)
Conduct tests on the switches.
q
While on the MENU screen, select I/O TEST and press the The TEST screen
will then appear.
DIP 4
12345678
[ON/OFF]
LINK
ON 2
I/O
PCB
INITIALIZE
SOLENOID TEST
ENTER
TEST screen
.
q
With the select switch, choose an option you wish
CO
execute. The selected option blinks.
q
Press the enter switch to go back to the test screen for the blinking option.
q
Select and press the enter switch to go back to the MENU screen.
(a)
Status
of the DIP switches
l
This displays the status of the DIP switches on the game PC board. The switches of the
numbers in red are on. (They are all factory-configured to be off.)
. All of them are normally used in the off status.
(b) Communication check
This represents
the
communications status.
When
unidentified data is received
Table of communication check settings
If screen displays LINK or LINK NG. the game will not function normally. The board
(game PC board) may be defective. Contact your dealer.
. When this machine is to
be
run one of the game PC boards for repair or other purposes.
it is be in the solo play mode. (See P-25,7-2-2 “Modes.“)
3 4