NAMCO EXCELEENA, Инструкция по эксплуатации

Страница: 14 / 22

(1) Remove the control panel cover. (Refer to p10 section 7-1"How to remove the
control panel cover")
(2) Open the face panel. (Refer to p11 section 7-2 "How to open the face panel")
(3) Open the maintenance door and disconnect the connectors (J 6, J 7) connected to
the monitor assembly.
(4) Remove the four hexagon bolts (M8X20) that secure the monitor assembly corners.
(5) Hold the upper handle of the monitor assembly and tilt it toward you to disengage
the End Boss at the rear of the monitor frame from the Slide Guide at the back of the
cabinet
(6) Hold both handles and lift the monitor assembly out of the cabinet
Hex bolt (MSX 20)
ぞ
口、
End Boss
Slide Guide
Figure
8
-1 2 -
Handles
7 ­ 3 How to remove the Monitor Assembly
Be sure to work with two people as it is heavy