NAMCO EXCELEENA, Инструкция по эксплуатации

Страница: 10 / 22

5 . Replacing the game PC board
5 ­ 1 Replacing the game PC board
(1) Open the maintenance door
(2) Disconnect the Edge Connector that conects the game PC board
(3) Remove the M4x20mm screw in the front of the PC board base
(4) Pull out the PC Board Base towards you, then replace the game PC board
□
三口
When using Namco System 2, NA­1, NA­2, NB-1, NB-2 PC Game board, you can enjoy
powerful stereo sound by using the included stereo conversion harness.
Figure 3
Game PC Board
Edge Connector
M4 x 20mm screw
PC Board Base
* Connect to the PC board and replace the 2p connector with "J13" on the main unit (see "10.
Wiring diagram" on page 20).
* If the game PC board of another company has a stereo speaker output, connect the right
speaker output to "J13" of the wiring harness to make it stereo. (see "10 Wiring Diagram" on
page 20).
- 8 -
5 ­ 2 How to use the stereo conversion harness (accessories)