evolution G-30 H
Service Manual
37/44
Issue 3.1
Ref. NR-00040-ENG
http://www.gamapur.com/
To achieve maximum output from the
evolution G-30 H
unit, certain daily or regular
maintenance operations are needed.
To prevent possible bodily harm caused by incorrect handling of the raw
materials and solvents used in the process, carefully read the safety
information provided by your supplier.
Deal with the waste created according to current regulations.
Disconnect the unit from the power supply before carrying out any
operation inside the electrical console.
The electrical maintenance of the machine must only be performed by a
qualified electrician.
To avoid damage caused by the impact of pressurized fluids, do not open
any connection or perform maintenance work on components subject to
pressure until the pressures have been completely eliminated.
Use suitable protection when operating, maintaining or remaining in the
operating area of the unit. This includes, but is not limited to, the use of
face masks, protective goggles, gloves, shoes and safety clothing.
The unit includes components that reach temperature that are liable to
cause burns. The hot parts of the unit must not be handled until they have
cooled.
To prevent serious harm by crushing or loss of limbs, do not work with
the unit without the safety duly installed on all moving parts. Make sure
that all of the safety protections are correctly fitted after all repair or
maintenance work.
MAINTENANCE
