evolution G-30 H
Service Manual
27/44
Issue 3.1
Ref. NR-00040-ENG
http://www.gamapur.com/
The
evolution G-30 H
unit has been designed and built to withstand severe working conditions
with a high degree of reliability, provided it is used suitably. This chapter contains information on
possible faults that may prevent the continuation of work with the unit. The information provided
must serve as guideline to detect and resolve the large majority of the problems before calling
for the assistance of the authorized distributor or
HI-TECH
technical service. In any case, feel
free to contact the technical assistance service of
HI-TECH SPRAY EQUIPMENT S.A.
, where a
qualified technician will advise you on whatever you may need.
All repairs performed by unqualified personnel or the use of spares other than originals
may cause damage to the unit and put the operator at risk.
To prevent possible bodily harm caused by incorrect handling of the raw
materials and solvents used in the process, carefully read the safety
information provided by your supplier.
Deal with the waste caused according to current regulations.
Disconnect the unit from the power supply before carrying out any
operation inside the electrical console.
The electrical maintenance of the machine must only be performed by a
qualified electrician.
To avoid damage caused by the impact of pressurized fluids, do not open
any connection or perform maintenance work on components subject to
pressure until the pressures have been completely eliminated.
Use suitable protection when operating, maintaining or remaining in the
operating area of the unit. This includes, but is not limited to, the use of
face masks, protective goggles, gloves, shoes and safety clothing.
The unit includes components that reach temperature that are liable to
cause burns. The hot parts of the unit must not be handled until they
have cooled.
To prevent serious harm by crushing or loss of limbs, do not work with
the unit without the safety duly installed on all moving parts. Make sure
that all of the safety protections are correctly fitted after all repair or
maintenance work.
TROUBLESHOOTING
