NAL RESEARCH CORPORATION A3LA-RG Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 119

background image

NAL Research Corporation (451-93156-009A)

62

A3LA-RG-reported values:

16

Modem has been locked and may not make SBD calls (see +CULK command)

17

Gateway not responding (local session timeout)

18

Connection lost (RF drop)

19

Link failure (A protocol error caused termination of the call)

20..31 Reserved, but indicate failure if used
32

No network service, unable to initiate call

33..34 Reserved, but indicate failure if used
35

A3LA-RG is busy, unable to initiate call

36..

Reserved, but indicate failure if used

This instructs the GSS to disable (detach) SBD ring alerts for the calling A3LA-RG. Successful
completion of the detach command implies that the GSS has performed the requested detach

action and the A3LA-RG is no longer registered for SBD ring alerts. This session does not
transfer any MO or MT messages.

Note: A user can send an MO-SBD message and request a detach at the same time by using
the +SBDI command. The +SBDI command always requests a detach.

A.8.105 +SBDI – Short Burst Data: Initiate an SBD Session

Note: The +SBDI command is provided for backwards compatibility with existing DTEs which
do not use SBD Ring Alert functionality. For SBD calls invoked with this command:



The SBD session type is fixed at type 0 – MO call



The SBD Delivery Short Code will be the value specified by the +SBDDSC command



An SBD Detach is performed as part of the call



No SBD location update is performed

DTEs requiring SBD Ring Alert functionality should use the exSBDIX command.

Exec Command: +SBDI
This command initiates an SBD session between the A3LA-RG and the GSS. If there is a
message in the mobile originated buffer it will be transferred to the GSS. Similarly if there is

one or more messages queued at the GSS the oldest will be transferred to the A3LA-RG and
placed into the mobile terminated buffer.



The message, if any, in the mobile originated buffer will be sent from the A3LA-RG to
the GSS



If there is a message queued at the GSS it will be transferred to the A3LA-RG and
placed into the mobile terminated buffer

Command Response:
+SBDI:<MO status>,<MOMSN>,<MT status>,<MTMSN>,<MT length>,<MT queued>

where:

<MO status>: MO session status provides an indication of the disposition of the mobile
originated transaction. The field can take on the following values:

0

No SBD message to send from the A3LA-RG

«
...
60
61
62
63
64
...
»

Содержание A3LA-RG
























































































































Отзывы:

Нет отзывов

Похожие инструкции для A3LA-RG

Бренд: Patton electronics Страницы: 9

Бренд: Campbell Страницы: 90

Бренд: 3Com Страницы: 24

MultiConnect Cell MTC-LVW2

Бренд: Multitech Страницы: 41

FSMODEM-CELLBASE

Бренд: Federal Signal Corporation Страницы: 16

U.S. Cellular FT2260

Бренд: Huawei Страницы: 30

U.S.Cellular UML397

Бренд: Huawei Страницы: 21

WiMAX USB Stick

Бренд: Huawei Страницы: 24

Turbo Stick E182

Бренд: Huawei Страницы: 18

Бренд: Huawei Страницы: 24

Бренд: Huawei Страницы: 3

Бренд: Huawei Страницы: 16

Mobile Broadband USB Modem Stick Lite

Бренд: Huawei Страницы: 16

T-Mobile webConnect UMG181

Бренд: Huawei Страницы: 56

Бренд: Lantronix Страницы: 56

Myriad MD9612FP

Бренд: Raymar Страницы: 33

Бренд: Four-Faith Страницы: 22

GSM1208PB001MAN

Бренд: Enfora Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды