9602-NAL QUICK START GUIDE
Support Phone#: 571-833-2169
451-92695-002B
2023-03-31
2
DEVICE DESCRIPTION (continued)
Antenna
: NAL Research recommends the SYN7391-C antenna.
CAUTION
: Do not or disconnect the antenna while device is powered.
DC Power Input:
The DC power interface comprises two DC power inputs, a ground
input, and a control signal. The 9602-NAL accepts 5 VDC input through pin #1
or +6.5 VDC to +32 VDC input through pin #2. The 9602-NAL is shipped with
hardware set for +6.5 VDC to +32 VDC input. It can be changed to +5 VDC input
through an internal jumper.
SYNC7391-C
Change Input
Voltage
to +5.0 VDC (Optional)
CAUTION
:
DISCONNECT POWER BEFORE RESETING THE JUMPER
1. With the modem turned off, remove the plate to find the jumper.
2. Set the red jumper to desired voltage range: left and center pins
for an input voltage of 5 VDC, and center and right pins for 6.5
VDC to 32VDC.
Jumper used to
set input
voltage range
CONFIGURE DEVICE TO OPERATE
1. Turn off modem.
2. Connect the antenna connector to the Iridium connector port on the
device.
3. Verify the antenna has full view of the sky and the cable loss between
the modem and antenna is <3 dB.
4. Connect a DTE to the DB15 port on the device using the HRC-24-11
Data/Power Cable Assembly.
HRC-24-11
Data/Power Cable
Assembly
