Nakayama PS3000, Руководство пользователя

Страница: 45 / 58

www.NakayamaTools.com
TRANSMISSION
The reduction gears are lubricated by multipurpose grease in the transmission.
Supply new grease every 25 hours of use or more often depending on the job condition.
When adding lubricant, use a grease gun to insert lubricant into the three grease
nipples located on the transmission.
POLE CHAIN SAW
OILING PORT
Dismount the guide bar and check the oiling port for clogging.
GUIDE BAR
Remove sawdust in the bar groove and the oiling port.
The bar rail should always be a square. Check for wear of the bar rail. Apply a ruler to
the bar and the outside of a cutter. If a gap is observed between them, the rail is
normal. Otherwise, the bar rail is worn. Such a bar needs to be corrected or replaced.
Air filter
Groove
Oiling port
Ruler
Gap
Chain tilts
No gap