Nakayama PS3000, Руководство пользователя

Страница: 38 / 58

www.NakayamaTools.com
Do not pull too far. Watch the cutting/mowing head while pull the starting cable.
8. Allow the engine to warm up for a several minutes before starting operation.
NOTE
1. When restarting the engine immediately after stopping it, leave the choke open.
2. Overchoking can make the engine hard to start due to excess fuel. When the engine
failed to start after several attempts, open the choke and repeat pulling the rope, or
remove the spark plug and dry it.
STOPPING ENGINE
1. Release the throttle lever and run the engine for half a minute.
2. Shift the stop switch to the STOP position.
IMPORTANT
！

Except for an emergency, avoid stopping the engine while pulling the throttle
lever.

When it doesn’t stop at the stop switch, move the choke level to the closed
position.
OPERATION- POLE SAW
WARNING
！
• Always wear work gloves made of leather or some other sturdy material when
using the pole saw.
• Falling branches may fall onto the face or into the eyes, resulting in injuries,
scratches, and cuts, and for this reason you should always be sure to wear a
helmet and face protector when using your pole saw.
CHECKING OIL SUPPLY
After starting the engine, run the chain at medium speed and see if chain oil has
scattered off, as shown in the figure.