Nakayama PS3000, Руководство пользователя

Страница: 41 / 58

www.NakayamaTools.com
Grass Mowing
-Working on grass areas, hold the scythe at an angle of ca 30°and make semicircle
turns to the left and right.
The best results are achieved with grass 15 cm high. If it is higher, it is
recommended to repeat mowing several times.
CAUTION! When the machine is running never put the mowing head on the
ground.
If the mowing output decreases
1.) Hold the running machine over the grass and
knock the ground several times with the mowing
head the fiber will get prolonged in thus way.
2.) The cutter enclosed in the protection shield will
cut the fiber to the required length.
Caution! The fiber remnant may be thrown off and cause an injury.
If the machine is vibrating:
Clean it or, where necessary, and remove the grass stuck on the mowing head and
protection shield.
1 Hold the clipper form and safely with both the hands.
2 Mow the grass and weed only, low shrubbery may be cut with a thick blade.
3 Work in a regardful manner and do not threaten anybody while mowing. Work
quietly and considerately!
4
Work only in conditions of sufficient visibility and sufficient light!
5 Watch the cutting head!
6 Never mow/cut above the height of your shoulders!
7 Never replace the plastic cord with steel wire – risk of injury and destruction!
8 Never work standing on a ladder!
Work on strong and stable bases!

Use the unit after you have read the operating instructions carefully.

Observe all the safety instruction in the manual.

Be responsible to the others.
MAINTENANCE
THE IMPORTANCE OF MAINTENANCE
Good maintenance is essential for safe, economical and troublefree operation. It will
also help reduce pollution.
WARNING
！

Improper maintenance, or failure to correct a problem before operation, can
cause a malfunction in which you can be seriously hurt or killed.

Always follow the inspection andmaintenance recommendations and
schedules in this owner’s manual.