Nakayama EC2040, Руководство пользователя

Страница: 25 / 26

24
insulated appliance is marked with the words, “DOUBLE INSULATION” or “DOUBLE INSULATED”. The symbol (a square within a
square) may also be marked on the appliance.
1. Place switch in OFF position and unplug the power supply before the appliance is serviced, cleaned, or maintenance is performed.
2. Keep the air intake clean and air vents free of debris to avoid overheating the motor.
3. Clean with a damp sponge and mild soap. Do not squirt with a water hose or douse with water or other liquids.
4. Inspect the saw chain for proper tension before each use and frequently during cutting. Sharpen as required.
5. Clean the guide bar and bar pad to ensure free path for oil.
6. Turn the bar over after each use to achieve even wear.
7. No motor lubrication is necessary. The motor is equipped with lifetime lubricated bearings.
8. If the saw does not operate, turn switch to OFF position and disconnect the extension cord, first from the power supply, then from
the saw. Check the power supply for blown fuses or tripped circuit breakers. If it still does not operate, contact the Product Service
Department, through the toll-free number listed on the back cover of this manual, for service information. Do not attempt to repair it yourself.
No serviceable parts are inside.
1. Meaning of crossed-out wheeled dustbin:Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities.
2. Contact you local government for information regarding the collection system available.
3. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the
foodchain damaging your health and well-being.
4. When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal at least free of
charge
Trouble Shooting
Fault Possible Causes Remedies
Chain saw doesn’t start Power failure
Detective power cable
Detective fuse
Chain brake hasn’t release
Check power supply
Check, exchange
Exchange
Release the chain brake
Chain saw runs intermittently On/off switch defective
Defective power cable
Find a specialized workshop
Exchange
Saw chain is dry No oil in the tank Fill with oil
Chain saw doesn’t saw correctly, jumps, or
knocks
Chain tension too low
Chain is dull
Chain is defective
Set chain tension
Sharpen/replace chain
Replace chain
Chain becomes hot Chain lubrication Check oil level
Check Chain lubrication