14
c.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d.
Do not abuse the cord
.
Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f.
If operating a power tools in a damp location is unavoidable, use a residual current device (RCD) protected supply.
Use of an
RCD reduces the risk of electric shock.
3. PERSONAL SAFETY
a.
Stay alert, watch what you are doing and use common sense when operating a power tool
. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious
personal injury.
b.
Use personal protective equipment.
Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and /or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have the switch
on invites accidents.
d.
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
e.
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected
situations.
f.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
Loose
clothes, jewellery or long hair can be caught in moving parts.
g.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and
properly used.
Use of these devices can reduce dust related hards.
4. POWER TOOL USE AND CARE
a.
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b.
Do not use the power tool if the switch doses not turn it on and off.
Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
c.
Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e.
Maintain power tools.
Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect
the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
f.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier
to control;
g.
Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the
particular type of power tool, taking into account the working conditions and the work to be performed.
Use of the power tool for
operations different from intended could result in a hazardous situation.
5. SERVICE
a.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety
of the power tool is maintained.
•
CHAIN SAW SAFETY WARNINGS
1.
Keep all parts of the body away from the saw chain when the chain saw is operating. Before you start the chain saw, make sure
Содержание EC2040
