Nakayama 015604, Руководство пользователя

Страница: 31 / 34

- 13 -
8. MAINTENANCE
•
BLADE
"
Sharpen each cutting edge and make sure the
bottom corner is rounded. (F13)
"
Do not cool the blade with water in case of using
grinder. It may cause cracks on the blade.
•
AIR CLEANER
Check and clean the filter element in warm, soapy water
as required. Dry completely before installing. If the
element is broken or shrunk, replace with a new one.
(F14)
(1) Cover
(2) Element
(3) Screen
(4) Body
A clogged air filter may increase fuel consumption while decreasing
engine power. Operating the brush cutter without the air filter or with a deformed filter
element will quickly ruin the engine.
•
FUEL FILTER
Take the filter out of the fueling port using a small wire hook. Disconnect the filter
assembly from the fuel pipe and unhook the retainer to disassemble it. Clean the
components with gasoline.
A clogged fuel filter may cause poor acceleration of the engine.
•
SPARK PLUG
Remove and inspect the spark plug and clean the
electrodes as necessary with a brush.
The spark gap should be adjusted to 0.6 ~ 0.7mm. (F15)
•
INTAKE AIR COOLING VENT
"
Check the intake air-cooling vent and the area around the cylinder cooling fins,
and remove any waste which has attached itself to the brush cutter
AFTER 25 HOURS OF USE
IMPORTANT
IMPORTANT