Nakayama 015604, Руководство пользователя

Страница: 28 / 34

- 10 -
6. FUEL
"
Gasoline is very flammable. Avoid smoking or
bringing any flame or sparks near fuel.
"
Wipe up all spills before starting the engine.
"
Make sure to stop the engine and allow it cool before refueling
the unit.
"
Keep open flames away from the area where fuel is handled or
stored.
"
Never use oil for 4-cycle engine or water cooled 2-cycle engine.
It can cause spark plug fouling exhaust port blocking or piston ring sticking.
"
Mixed fuels which have been left unused for a period of one month or more, may
clog the carburetor or result in engine failing to operate properly. Put remained
fuel into an airtight container and keep it in the dark and cool room.
Mix a regular grade gasoline (leaded or unleaded,
alcohol-free) and a quality-proven motor oil for
air-cooled 2 cycle engines.
RECOMMENDED MIXING RATIOGASOLINE 25:
OIL 1
7. OPERATION
•
STARTING THE ENGINE
"
Before starting the engine, inspect the entire unit for loose
fittings or fuel leaks, and the cutting attachment is properly
installed and securely fastened.
"
Place the unit on a flat, firm place. Keep the cutting
head clear of everything around it.
1. Turn the cap to the fuel tank to make sure that it is
fixed on tightly. (F8)
2. Pump the fuel pump bulb until fuel is visible and
flows freely in the clear fuel tank return hose.
(1) Tank Cap
(2) Fuel tank
(3) Fuel pump bulb
3. Move the choke lever to the closed position. (F9)
(1) Choke lever
(2) Close
(3) Open
When restarting immediately after stopping the engine,
move the choke lever to the open position.
WARNING
IMPORTANT
WARNING
NOTE