Nakayama 015604, Руководство пользователя

Страница: 30 / 34

- 12 -
•
CUTTING OPERATION
METAL BLADE USAGE
i. Always cut by guiding the head from your
right to left.
ii. A metal blade will cut up to the point 1/3 from
the edge. Use that area for cutting shrubs,
tough and thick weeds. For cutting young
grass, you can use up to 2/3 from the tip of
blade.
iii. Adjust the engine speed according to the
cutting objects. Cut the young grass at
middle speed, and cut shrubs or tough and
thick weeds at high speed.
(1) For branches and trees
(2) For grass and weeds
(3) Direction of cutting
(4) Direction of rotation
Operating at low speed makes it easier for grass, weeds, or twigs
to become caught up the blades, and also it makes the shaft and clutch wear down
more quickly.
NYLON CUTTER USAGE
"
Nylon cord consumes large amounts of power.
Please note that the engine rotation speed in
operation should be 50% as fast as when using
metal blade.
"
Nylon cutter cut grass with the power of cord
rotation. If you try to cut grass for the length of cord
at one time, rotation speed becomes lower due to
resistance and you cannot cut grass well. In case of
large resistance, get the nylon cutter away from
grass once, make the rotation speed higher, and cut
a small amount of grass at one time.
"
If you try to cut grass by swinging the brush cutter in
the reverse way (from left to right), scraps fly in the
direction away from the body. You can avoid getting
your clothes dirty this way.
IMPORTANT