Nakamichi DRAGON 11.4.6, Руководство пользователя

Страница: 81 / 88

81
12.3 Help and Troubleshooting
i. Verify the power connections of both subwoofer units. Power on the system. Ensure the LED indicators on both subwoofers
are lit with a solid blue light.
If any subwoofer displays a continuously flashing blue LED, perform the subwoofer pairing procedure (Section 10.2, Pg
61).
If the bass output from any subwoofer is intermittently cutting out, adjust the wireless frequency channel or strength
settings (Section 6.5A, Pg 49).
ii. Press SUB+ on your remote, until “Quad Subs” is shown on the main unit display. Push up the Bass button on your remote
to increase bass output.
iii. Press “
Home” to open DRAGON’s OSD. Navigate to Calibration > Volume Level Calibration. Scroll down and ensure the
subwoofer level for both subwoofers are set to at least 5 (default).
iv. Certain content may be recorded with weak bass effects. Try playing content that is encoded with 5.1 channels or above.
v. Experiment with subwoofer placement (See recommendations in Section 2.1, pg 12).
i. Ensure your device is sending surround sound to DRAGON. Only devices connected via HDMI or optical can send surround
sound to DRAGON. Bluetooth transmissions are limited to stereo sound.
ii. When using Bluetooth or Aux-In to play stereo content, press “All Channel Stereo” to send stereo sound to the surround
speakers.
iii. Press SS+/SB+ on your remote to increase the volume of surround effects.
7. No surround sound or surround sound volume is lower than expected
8. Bass seems weaker than expected
i. Replace the batteries with new ones.
ii. Try re-pairing the remote control to the main unit (Section 10.4, pg 65).
iii. Use the remote within reasonable proximity to the main unit.
iv. Ensure that the remote is using Bluetooth mode. When operating in infrared mode, it is important to point the remote
directly at the main unit for optimal response.
9. Remote does not work