7
nP-
Maximum
power
output
The maximum power percentage of the heating
output.
(0
～
100%) 100
Co-
Turn off the
heating
output
deviation
When the "temperature measurement value
≥
temperature set value + Co", the heating output is
turned off.
(0.0
～
20.0
℃
)
5.0
SPL
Lower
temperature
setting
Lower limit of temperature set point
(-50.0
～
100.0
℃
)
0.0
SPH
Upper
temperature
limit
Upper limit of temperature set point
(SPL
～
100.0
℃
)
60.0
Adr
mailing
address
The local communication address.
(1
～
16) 1
Internal parameter table -3
Parameter
indication
Parameter
name
Parameter function description
Factory value
Lc
Password
The ambient temperature can be viewed when
"Lc=18".
Ht
Ambient
temperature
The ambient temperature at which the controller is
located.
2.
Speed internal parameters setting
Press and hold the
“
Speed
”
button for about 3 seconds. The temperature display area
displays the password prompt
“
Lc
”
. The speed display area displays the password value. You
can change the password value to the required password value by adding the key, decreasing
key and shift key. Then click the
“
Speed
”
button. If the password value is incorrect, the
controller will automatically return to the normal display state. If the password value is
correct, it will enter the speed internal parameter setting state, and then click the
“
Speed
”
button to modify each parameter in turn. After the modification, press and hold the
“
Speed
”
button for 3 seconds to exit the speed internal parameter setting state, and the parameter value
is automatically saved.
Note: The speed parameter is forbidden to be modified during the running of the controller. If it needs
to be modified, please stop the controller and then modify it.
Speed---internal parameter table (1)
Parameter
indication
Parameter
name
Parameter function description
(Range) Factory Value
Lc
Password
The parameter value can be viewed and
modified when "Lc=3".
0
Pd-
Proportional Speed proportional gain.
(1
～
100) 10